Nylon Hard Anti Metal RFID Tag
- Ultra-rugged nylon housing built to endure harsh industrial and outdoor environments.
- Support LF, HF, UHF or dual-frequency chips in a single tag.
- Integrated anti‑metal layer ensures stable reading on metal and non‑metal surfaces.
- Pre‑drilled holes allow permanent installation with screws, rivets, or cable ties.
When standard tags fail under pressure, the Nylon anti metal RFID tag delivers. Built for extreme industrial and outdoor conditions, the tag’s ultra‑hard nylon housing provides superior protection against impact, abrasion, moisture, and chemicals.
By supporting LF, HF/NFC, UHF, or dual‑frequency chips within the same durable body, these anti metal tags are compatible with any RFID infrastructure or multi‑system workflow.
An integrated anti‑metal layer inside the tag ensures reliable read performance on both metal and non‑metal surfaces. You can install it via screws, rivets, or heavy‑duty cable ties, which is ideal for high‑vibration environments.
Nylon anti Metal RFID tag Key Features
- Ultra‑Durable Nylon Housing – Withstands impact, abrasion, moisture, and harsh chemicals.
- Multi‑Frequency Support – Available in LF, HF (NFC), UHF, or Dual Frequency configurations.
- Optimized On/Off‑Metal Performance – Built‑in anti‑metal layer ensures stable reads on any surface.
- IP68 Rated – Fully waterproof and dustproof for reliable use in outdoor and industrial environments.
- Secure Mounting Design – Mount permanently with screws, rivets, or cable ties.
- Laser‑Engraving Ready – Ideal for logos, serial numbers, and unique identifiers.
As a dedicated industrial RFID tags supplier, we also offer full customization for these nylon RFID tags from chip configuration and color selection to laser‑engraved IDs, serial numbers, or logos. Check the custom tab for more details or contact us to design a tag that fits your exact operational needs.
What Makes This Nylon Hard Anti Metal RFID Tag Different?
The Nylon Hard Anti Metal RFID Tag is the rugged screw-mount option in the anti-metal tag range. Unlike printable on-metal labels that are designed for roll printing, this hard nylon tag is built for physical fastening on industrial assets, outdoor installations, and high-vibration environments. The page lists screw, rivet, cable-tie, and binding-slot mounting options, so it is a better fit when the tag needs to stay attached to tools, frames, machinery, or other metal assets that cannot rely only on a label-style adhesive.
This model also stands out because it can be configured across LF 125 kHz, HF/NFC 13.56 MHz, UHF 860–960 MHz, or dual-frequency combinations. Choose it when a project needs a hard anti-metal RFID tag with IP68 protection, pre-drilled mounting options, and flexible chip selection rather than a single-purpose UHF-only label.
Compare Similar Anti-Metal RFID Tags
- Choose the ABS housing anti metal RFID tag for industrial tools and gas cylinders when a sealed ABS housing and multiple industrial mounting methods are preferred.
- Choose the PCB anti-metal RFID tag for compact on-metal asset tracking when a rigid PCB format, small custom shapes, or long-range UHF performance is the main requirement.
- Choose the printable flexible on-metal UHF RFID label for serialized assets when the project needs roll-supplied labels for printing barcodes, QR codes, or serial numbers.
- Choose the NFC anti-metal tag for phone-readable maintenance records when smartphone tap interaction is more important than UHF inventory reading.
Nylon Hard Anti Metal RFID Tag Tech Specs:
Physical Specifications
- Housing Material: Nylon
- Available Sizes (mm): 42 x 19.5 x 4, 70 x 32 x 8, customize
- Standard Color: Black (Custom colors available)
- Waterproof Rating: IP68
Technical Parameters
Operating Frequency: 125KHz (LF), 13.56MHz (HF), 860-960MHz (UHF), or Dual Frequency
Communication Protocol:- LF: Various (e.g., EM4200, T5577)
- HF: ISO 14443A, ISO 15693, ISO 18092
- UHF: EPC Class 1 Gen 2 (ISO/IEC 18000-6C)
Read Range (On Metal):
- UHF (70x32mm): 4 – 5 meters
- UHF (42×19.5mm): 2 – 3 meters
- HF/LF: Varies by chip and reader (typically centimeters)
Chip Options (Full Customization Available)
- LF: EM4200, TK4001, T5577, EM4305, Hitag Series, etc.
- HF (NFC): NXP NTAG®, ICODE®, MIFARE® Series (Classic®, DESFire®, Plus®, Ultralight®), Fudan FM11RF08, etc.
- UHF: Alien Higgs, Impinj Monza (R6, M730, M750), NXP UCODE, etc.
Environmental & Operational Specifications
- Operating Temperature: -20°C to +80°C (-4°F to +176°F)
- Mounting Options: Screw/Rivet Holes, Cable Tie (Binding) Slots
Nylon Hard On-Metal RFID Tag Customization
The Nylon anti-metal RFID tags are specifically designed for harsh industrial and outdoor environments. We will leverage its robust construction and multi-frequency capabilities to meet the demanding tracking requirements while customizing.
1. RFID Chip & Performance
- Multi-Frequency Support: For any of the following frequencies:
- LF (125KHz): Ideal for access control and animal tracking. Supported chips include EM4200, T5577, Hitag series, etc.
- HF/NFC (13.56MHz): Perfect for maintenance logs and mobile interaction. Supported chips include MIFARE®, NTAG®, and ICODE® series.
- UHF (860-960MHz): For long-range asset management. Supported chips include Impinj, NXP UCODE, and Alien Higgs series.
- Dual-Frequency Option: HF+UHF, LF+UHF, LF+HF
2. Physical Specifications & Sizing
- Available Sizes (mm): 42 x 19.5 x 4 mm, 70 x 32 x 8 mm.
- Material: Nylon.
- Color: Black or customize.
3. Personalization & Branding
We offer laser engraving service for LOGO, UID, or sequential numbering directly onto the tag’s surface for identification that will not fade or wear off.
4. Mounting Methods
- Screw / Rivet Mounting: The tags feature holes for secure attachment with screws or rivets.
- Cable Tie / Binding: The design allows for robust fixation using industrial cable ties or metal binding straps.
5. Programming
We offer pre-programming services for all chip types. We can encode your specific data, such as asset IDs or system-specific information.
What makes Nylon tags so durable?
ANylon is an engineering‑grade thermoplastic with outstanding toughness and resistance to abrasion, impact, chemicals, and wear—making it far stronger than standard plastics and ideal for harsh industrial or outdoor use.
Will these tags work on non‑metal surfaces?
Yes. The internal anti‑metal layer allows reliable performance on both metal and non‑metal surfaces
Do you offer wholesale pricing or samples?
Yes. We provide competitive wholesale pricing for bulk orders and can supply samples for testing upon request.
When should I choose a nylon hard anti metal RFID tag?
Choose this tag when the RFID tag must be mounted with screws, rivets, cable ties, or binding slots on metal assets. It is especially useful for industrial or outdoor installations where a hard housing is preferred over a printable RFID label.
Can this nylon hard tag work on metal surfaces?
Yes. The product page describes an integrated anti-metal layer and UHF on-metal read ranges that vary by size, reader, and environment. The tag can also be used on non-metal surfaces when the project design requires the same hard-tag format.
Which RFID frequencies are available for this hard anti-metal tag?
The page lists LF 125 kHz, HF/NFC 13.56 MHz, UHF 860–960 MHz, and dual-frequency options such as HF+UHF, LF+UHF, and LF+HF. The best option depends on the reader system and application.
How is this tag different from a printable on-metal UHF label?
The nylon hard tag is a rigid mounted tag for stronger physical attachment. A printable on-metal UHF label is better when roll printing, barcodes, QR codes, and adhesive label workflows are the priority.
Work with Our Experts in RFID Products
Let's build something remarkable together!